Homes in Moore run the full range: post-war construction with wiring that has never been touched, mid-century additions where circuits were tacked on without much documentation, and newer builds where the panel is sized for what was there at closing but not for what came after. Landlords managing rental properties here deal with turnover work, outlet replacements, and the occasional panel that was never quite right. Businesses need circuits that keep up with their equipment and repairs that can happen without shutting the whole operation down. Whatever the situation, the call comes to us and we scope it on the phone before anything is scheduled.
We handle residential and commercial electrical work across Moore and Cleveland County, from a single outlet that stopped working to a full panel replacement or a whole-home rewire. We take the call, asks the right questions, and give you a price before the visit is booked. That is how every job starts here, whether the property is a rental house, a family home, or a commercial space.
Scheduling starts on the phone. When you call, someone who knows the trade answers and walks through what you are describing: the symptom, where in the property it is happening, and any relevant history on the wiring or the panel. That conversation is enough to scope most jobs and give you a realistic price range before anything is put on the calendar.
For situations that will not keep, we take short-notice calls and urgent work as part of the regular schedule. If a breaker will not reset, if there is a burning smell near a panel or outlet, or if part of the property has gone dark, call and we will confirm what the schedule allows for that day.
When the property has tenants or a business running through the visit, we work around what is there. That means confirming access arrangements on the call, understanding which circuits need to stay live, and planning the work so the disruption is as short as possible. You get a straight answer about the work before it is scheduled.
Commercial properties in Moore bring a different set of constraints. A retail space or office building has hours it has to keep, equipment that cannot go down mid-shift, and sometimes multiple tenants sharing the same electrical infrastructure. A repair that would be a one-hour job in an empty house takes more planning when part of the building has to stay operational.
We handle that planning on the call. Out-of-hours scheduling is available when the work needs to happen outside business hours. When only part of a site needs to go down, we identify which circuits can be isolated and which need to stay live, and we confirm that scope before arriving.
Commercial panel work often involves higher service capacity, multiple subpanels, and circuits that feed equipment with specific load requirements. We run load calculations, size the work correctly, and handle service-entrance upgrades when the incoming capacity needs to match what the building is actually drawing.
For light industrial and multi-tenant properties, the job plan matters as much as the repair itself. We confirm which areas are affected, communicate the sequence before starting, and work through the job in a way that keeps the rest of the property running. If the work requires a utility coordination or a panel shutdown, that is part of the conversation before anything is scheduled.
Most electrical jobs start with a symptom that points toward something specific. The list below covers the job types we handle regularly. Each one has a situation behind it, and understanding that situation is how the work gets scoped correctly.
A detached garage or workshop that needs more than a single circuit is the most common reason a subpanel comes up. Running a dedicated feed from the main panel to a subpanel in the outbuilding keeps the circuits organized, sized correctly, and separate from the house load. We handle the feed, the subpanel installation, and the circuits inside the structure.
A generator is only as useful as the transfer switch and wiring behind it. The transfer switch keeps the generator isolated from the utility line, which matters for safety during an outage and for anyone working on the lines nearby. We install manual and automatic transfer switches, run the circuit from the panel to the generator connection, and confirm the critical circuits are configured correctly before the job is closed.
This region sees severe thunderstorms, ice storms, and extended outages. A properly wired generator hookup is not a convenience item in this part of Oklahoma.
Replacing a standard switch with a dimmer or a smart switch involves more than swapping the device. The wiring at the box has to support the load, the neutral conductor has to be present for most smart switches, and the breaker feeding that circuit needs to match. We check all of that before the device goes in.
New fixture installation covers ceiling fixtures, recessed lighting, and LED retrofit work on existing cans. Where no ceiling box exists, we run the circuit and install a box rated for the fixture weight. For recessed lighting, we confirm the insulation contact rating and the circuit capacity before the layout is set.
A panel with missing or inaccurate labels is a real problem when something goes wrong. We trace circuits, confirm what each breaker actually feeds, and label the panel accurately. For older homes where circuits have been added over time without documentation, this work often turns up double-tapped breakers, overloaded circuits, and GFCI gaps that need to be addressed at the same time.
A three-way switch that stops working correctly, or a multi-location switching setup that needs to be added where only a single switch exists, involves more wiring than a standard switch replacement. We trace the existing wiring, confirm the traveler configuration, and wire the new setup so all switch locations work correctly.
Ceiling fan installation, EV charger circuits, exterior lighting, and GFCI and AFCI protection upgrades are also part of the regular work we do in Moore. If the job is not on this list, call and describe it. We will tell you on the phone whether it is something we handle.
The price for a job depends on what the fault turns out to be, what has to be opened up to reach it, and whether the existing circuit or panel can carry the change being made. A panel with capacity to spare prices differently than one that needs a service upgrade before a new circuit can be added. Wiring that runs through finished walls takes more time than wiring through an open basement.
We go through all of that on the call. You get a price before the visit is scheduled, and if the scope changes once we are on-site, we explain why before continuing. Details on each of these are on the page listing our electrical services.
Call (572) 223-5695 and we will work through what the job involves.
Attics, crawl spaces, and tall ceilings change how a job is planned before anyone arrives. Running wire through a finished wall is straightforward when the attic above it is accessible. When the attic is tight, insulated heavily, or the crawl space has limited clearance, the approach to the same job changes.
We ask about access on the call. Knowing whether the attic has a pull-down stair or a hatch, whether the crawl space is passable, and whether the ceiling in question is vaulted or standard helps us plan the job correctly and give you an accurate price. A job that looks simple from the outlet or fixture sometimes opens up into more once the access conditions are understood.
For tall ceilings, fixture replacement and ceiling fan installation require the right equipment for the height involved. We confirm that on the call so the visit is set up to go smoothly.
The gap between tenants is the easiest time to do electrical work in a rental property. Nobody is living there, access is straightforward, and work that would otherwise mean coordinating around a household's schedule can be done without disruption.
That window is the right time to address panel labeling, GFCI and AFCI protection gaps, outlet replacements, and any wiring that was flagged during a move-out inspection. It is also when a landlord can add circuits for a washer and dryer, upgrade lighting, or run the dedicated circuit for an EV charger without working around a tenant's schedule.
We can schedule turnover work quickly. Call when the property is vacant and we will confirm what the schedule allows and what the work involves.
We serve Moore and the communities around it, including Valley Brook, Del City, Smith Village, Newcastle, and Norman. Cleveland County is part of our regular service area.
If you are in one of those communities and are not sure whether we cover your address, call and ask. We confirm coverage on the phone and can usually discuss scheduling on the same call.
It depends on where the wiring needs to go and what access is available from above. In some cases, wiring can be fished through a wall or run through an attic without opening the ceiling. In others, a ceiling section has to be opened to reach a junction or run a new circuit. We explain what access is needed before the work starts.
Permit requirements depend on the type of work and the jurisdiction involved. Some jobs require a permit and inspection, others do not. We go through that on the call so you know what applies to your job before anything is scheduled. Where a permit is needed, we explain the process and what it means for the timeline.
Rental turnover work in Moore tends to surface outlet failures, missing or inaccurate panel labels, and GFCI protection gaps in kitchens and bathrooms. Older rental stock sometimes has circuits that were added without documentation, which shows up as double-tapped breakers or overloaded runs. A call before the next tenant moves in is the easiest time to address all of it.
The supply to an outbuilding is run from the main panel, either overhead or underground, depending on the distance and what the site allows. Underground cable has to be buried at the correct depth and protected at the entry point. We assess the route, the load the outbuilding needs, and whether the main panel has the capacity before any work is quoted.
A built-in wall oven and a cooktop are typically separate 240-volt appliances, and each usually requires its own dedicated circuit. Running two circuits for a kitchen configuration like this is common in a kitchen renovation or appliance upgrade. We confirm the amperage each appliance draws and size the circuits accordingly.
It is a good idea to keep pets away from the work area, particularly when the panel is open, access points are cut into walls, or tools and materials are spread across the floor. We do not require it as a condition of the visit, but it makes the work go more smoothly and keeps the pet safe.
Any equipment that cannot tolerate a sudden power loss, such as a desktop computer or a network-attached storage device, should be shut down before the power goes off. We confirm the shutdown window on the call so you have time to prepare. A whole-home surge protector installed at the panel helps protect equipment from voltage events after power is restored.
Yes. Out-of-hours scheduling is available for commercial work that cannot happen during business hours. When only part of a site needs to go down, we identify which circuits can be isolated and plan the work around what has to stay live. That scope is confirmed on the call before the visit is booked.
We answer the phone, scope the job, and give you a price before the visit is booked. We show up, explain what we find, and complete the work. If something changes once we are on-site, you hear about it before anything continues.
Careful diagnosis. Code-compliant work. Professional service.
Call (572) 223-5695 for a quote on electrical work in Moore.
We also take electrical work in: Del City, Newcastle, Norman, Midwest City. Everywhere else we go is in our coverage area list.
We handle the full range of residential and commercial electrical work in Moore and across Cleveland County, from a single dead outlet to a complete service upgrade. The table below covers what each service includes, who it fits, and what is practical to know before you call. Every job is scoped and priced before work starts, so you know what you are getting into before anyone shows up.
| Type of Work | What It Covers | Common Situations | What to Keep in Mind |
|---|---|---|---|
| Outlet & Switch Installation | Grounded outlet upgrades, GFCI installation in wet areas, USB and specialty outlet installation, Dimmer switch wiring | Homes with two-prong ungrounded outlets, missing GFCI protection, or outdated switches throughout | GFCI protection is required by code in kitchens, bathrooms, garages, and outdoor areas. Adding it where it is missing brings those circuits into compliance. |
| Whole-Home Surge Protection | Panel-level surge device installation, Grounding adequacy check, Service entrance protection | Homes with sensitive electronics, appliances, or HVAC equipment that could be damaged by a voltage spike from a storm or grid event | Oklahoma thunderstorms produce frequent lightning strikes and grid switching events. A panel-level device catches surges at the service entrance before they reach any circuit in the home. |
| Electrical Panel & Service UpgradesMost Popular | 100-amp to 200-amp upgrades, Fuse box to breaker panel conversion, Subpanel installation, Service entrance coordination | Older homes adding EV chargers, large appliances, or air conditioning circuits that the existing panel cannot carry | Oklahoma summers push cooling loads hard for months at a time. A panel that cannot carry the demand trips repeatedly or runs hot without tripping, which is the more serious condition. |
Call (572) 223-5695 and we will walk through what the job involves, what it is likely to cost, and what the schedule looks like for your area.
(572) 223-5695